null Skip to main content

DELTA Chassis Mount (Snap In) EMI Filter Type: 03GENG3E Like NEW

Delta Electronics

$4.00
Condition:
Used
Minimum Purchase:
1 unit
Maximum Purchase:
2 units
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

Every piece of equipment powered via the single phase AC mains supply should have one of these installed in the AC supply input line and often (but not always) there is some sort of EMI filtering built into the IEC rear panel socket or internally but this is not always the case with commercial equipment.

If you have electronic equipment that is behaving strangely, particularly when other equipment is being turned on or off e.g motors or one of the worst culprits for generating unwanted EMI are SMPS based systems, then you may have an EMI issue (in a nutshell, there are unwanted nasties travelling along for the ride with the expected AC supply line)

The beauty of these "stand-alone" modules is that you can disconnect your existing rear panel IEC socket wiring, connect this EMI filter block between the power coming in and the power going to your equipment internally and your EMI problems MAY BE be solved.

DELTA Electronics has been in the "power game" for a very long time, quality engineered and construction.

DELTA ELECTRONICS - EMI Filter

Model: 03GENG3E

Made in Thailand (under licence)

IEC male socket (non-fused) input

Suitable for 115/250V 60/50Hz operation, maximum through current is 3A

2x L @ 2.5mH & 1x C @ 0.1uF + 2x 2200pF

Rated for use up to 40 degrees C

All output terminals are spade type

Metallic label on top of the casing identifies the filter, provides component values and a filter schematic

No mounting holes, this is a snap in filter (spring metal fingers top and bottom)

DIMENSIONS:

All metal casing

BODY: 26mm wide x 40mm depth x 18mm height

IEC SOCKET FACIA: 31mm wide x 23mm height

COSMETIC CONDITION:

I have described this filter as "like New" because it was not packeted in the drawers and although it appears to have never been used (no scrape marks on the spade terminals for example) I just cannot be sure it is actually new.

CLEAN

Spade terminals are clean and not oxidised or even marked at all!

These filters have now been packed into individual sealed packets to maintain their current very good condition, waiting to have a purpose in life!

*** Where the photograph may show multiple items, this advertisement is for ONE ONLY not all that are shown!

Like NEW Exactly as described