Ex the previous audio production business "Prototyping" stock, a left over from a bygone era when I was working on design and development of audio related equipment, this box has already been prepared for assembly but never proceeded to becoming a finished product.
METAL ENCLOSURE WITH REMOVABLE TOP LID
Material: Zinc (diecast)
Stock standard small diecast enclosure with a metal top lid secured by 4x bolts.
Completely empty inside
Yes, it has had the application of a gloss Black external spraying.
Those topside holes were for some special XLR type connectors ... why special? There isn't much depth inside the case and a "normal" barrel of an XLR connector is just too long plus the flange on the connectors we used were round and not the standard rectangular shape.
SOME DIMENSIONS:
Case (external): 89mm length x 29mm height x 32mm wide (told you it was small!)
The holes have been "machine punched" so the edges are clean and even.
Each hole is 23mm diameter
The mounting holes (Yes, these have been made with a thread) are set diagonally at a distance of 30mm across the diagonal
The case is shallow and the absolute maximum depth available for a connector is 25mm
Of course if these holes do not suit your own project and you have a spare lid "lying around", just change the lids as these diecast enclosures have pretty standard sizing.
COSMETIC CONDITION:
NEW Unused but prepared for production (3x punched holes & Black finish applied)
NO physical damage at all
NO scratches or marks to the Black finish
4x Chrome plated top lid securing screws are supplied, in fact these are supplied already fitted.
Stored and supplied in a sealed, clear plastic packaging.
