Ex workshop spare parts and small manufacturing stock
ALL devices have been sourced through reputable local distributors such as RS Electronics, Farnell, WES and Rockby (Victoria) NOT direct import Chinese (often dodgy spec) devices
TECCOR (Texas USA)
(Acquired by Littelfuse USA 2003)
Part #: Q6025P5
Triac/Alternistor
Vdrm 600V
It (rms) 25A
Specifically designed for applications which are required to switch highly inductive loads. To accomplish this, a special chip has been designed which effectively offers the same performance as two thyristors (SCRs) wired inverse parallel (back to back); hence this Alternistor has better turn-off behavior than a standard triac.
The device may be gate triggered from a blocking to conduction state for either polarity of applied voltage and is designed for AC switching and phase control applications such as speed and temperature modulation controls, lighting controls, and static switching relays. The triggering signal is normally applied between the gate and MT1.
Datasheets are readily available online
Full part # on package MT1 MT2 G (Spade function designations) Q6025P5 8H11 (T stylised Teccor manufacturers logo)
Package: TO-03
NEW Old Stock (still in the trays)
Shiny, clean male spade connectors & large heatsink
Supplied in an ESD tray originally, stored the same way and these will be sent safely packaged (type of packaging will depend upon the quantity purchased)
Where the photograph shows multiple devices, this advertisement is for ONE device not all that are shown!
