Ex workshop spare parts
I cannot recall which equipment we had this spare part on hand for but it would have been a Japanese piece of gear
Subminiature slide switch with all contacts in a single line plus outer body anchor points on each corner, all designed for PCB thru hole mounting.
ALCO - Sub-Miniature Switch
Made in Japan
Part # MSS-2200
PCB mounting (thru hole)
Look to be Nickel plated pins
Mechanical action: Slide
Contacts are arranged in a single line (6x pins) with the 2nd pin from either end being the common.
Electrical information:
2x independent slide action switches (each SPDT)
DIMENSIONS:
Sub-miniature
All metal body
Short Black plastic actuator measuring 3.4mm x 2.2mm and 3mm height above the switch body
BODY: 14mm W x 5.75mm D x 9mm H
TESTING:
Although NEW Old stock and residing in a sealed packet, I wanted to check the switch operation ...
Slide movement is fine, not sloppy
Measured very low contact resistance in each direction and with each switch - no issues here.
Gave it a squirt of switch cleaner for good measure!
This switch is sealed underneath but not at each end.
I have no way of establishing what the contact material may be.
COSMETIC CONDITION:
NEW Old Stock
Clean and undamaged physically
This slide switch has now been placed back into a sealed clear plastic packet, waiting for someone to make use of it!
