BACKGROUND:
Another of my "oddities" ... if you look around our family website you can see that I have been involved in the field of electronics for a long time (some of the gear and components is VERY old). My initial introduction to the professional world of electronics was back in the early 1970's, the telco industry in New Zealand. My secondary interest on a personal or hobbyist level was the world of time keeping.
This paperweight was a later purchase for the office desk and to me it was the perfect almalgamation of my foray into the world of telephones along with time, the paperweight served to remind me of my beginnings in both of those interests AND Hey, it kept the letters firmly on the desk when the fan was blowing!
Bear with me just a little, this type of object just creates a flood of memories for me while thinking about this desktop accessory ... this paperweight takes me back to the days when I first started out in the world of telephony. It was in the early 1970's and I was a trainee in telephony. The exchange I worked in was rotary, as the name suggests, it functioned by using long long rotating shafts which were almost at floor level.

Noisy as hell but fascinating to watch it in action. It was sitting alongside, and working in conjunction with (although this interfacing didn't always work out properly!), a "standard" Step By Step (SXS) exchange. I remember when both of these technologies were being upgraded and the Japanese visitors from Fujitsu were just standing there, jaws dropped to the floor! ... absolutely in awe of the rotary equipment - lots of "happy snaps" were taken by them. Why Japanese? The contract for the new equipment went to Fujitsu for their "super you beaut" Crossbar technology.
Sitting on a pedestal in the same exchange building was one of the infamous "talking clocks"

These were the days when you could call a special service number and the current time would be "spoken" to you ... something like "beep beep beep ... on the third stroke, the time will be precisely 1pm" I can't remember the exact wording ... but the amazing thing is that this talking clock was mechanically driven, in fact I recall all the wall clocks throughout the exchange were synchronised together using 50V pulses. I also cannot recall how the voice was generated, I am guessing a closed loop of tape was used ... at this time there were no IC's capable of voice generation, Geez SINCLAIR in UK were just releasing one of the first home computers and I don't think TI's talking toys (Speak n Spell) had been created yet.
Getting the correct time was hard to come by in those days ... Internet? What's that - not even the Universities (the original Internet users) were running Internet like communications at that time. The VERY LATEST consumer wristwatches were LED based, a big departure from the analog clockwork watches. I remember a workmate who had deep pockets and got himself one of the LED watches ... the front screen was normally Black and blank. Push the button and the time would show in Red (LED's) and then after around 5 seconds, disappear again. He always complained of the batteries needing to be changed so often and he wasn't entirely happy with the accuracy of the time keeping.
My Oh My, how things have changed over the last 55 years!
Some years later, around the 1990's I think it was, I was well and truly out of the telco world but still had many fond memories and I came across this dicky little paperweight! In my mind it perfectly represented my memories and it kept the loose paper and letters down on the desktop!
While I do have these memories (today anyway ... tomorrow maybe not!), I am also firmly planted in the present and can see what lies in the future for objects such as this unless I make an effort to save it! Our children will no doubt just toss this into landfill when I shuffle off this planet so this is my attempt to save it from the certain fate of obilivion! Perhaps thousands of years from now, a visitor to our planet may dig one of these up and wonder at the "highly evolved" civilisation that existed on the planet - once!
So, let me tell you a bit about this paperweight (finally)
ORNAMENTAL PAPERWEIGHT
Country of origin is unknown
Three distinct features ...
1: It's heavy, as all good paperweights should be!
2: It crudely represents a telephone instrument circa early ~ mid 20th Century
3: It tells you the time, using a Casio movement in the central area of the telephone
Addressing each feature
1: Weight is 470g - no amount of wild winds will dislodge any papers that are sitting underneath this paperweight!
The material used is marble, this is NOT soap stone. crafted from six separate pieces of shaped marble and then fitted/glued together.
2: The representation of a telephone is quite crude in detail, just the basic handset with transmitter and receiver, the dial area (hollowed out for the timepiece) and the base.
3: Where your dial (or a handle would be if it was a manual phone) should be, there is instead a metal cased CASIO movement finished in Gold gilt. Standard round face Quartz crystal (battery operated) clock with a seconds hand. This movement is friction fitted into the telephone dial area, nice fitting which is not too difficult to carefully remove for time adjustment or battery replacement.
How much real estate on the desk does it take up?
Measures 96mm diameter x 20mm height BASE
Maximum height of the ornament is 55mm above the desk surface
TESTING:
Yes, I have had this paperweight for a long, long time and the clock had stopped. I found the back of the case difficult to unscrew so took it to a Watch Repairer and they changed the battery for me. The clock works fine BUT ... it does have a little "quirk" (we all develop quirks after many years!)
THE "QUIRK" ... the repairer noticed that when the battery was first changed, the clock still didn't work but then after pushing the time adjustment button back to the normal position AND waiting a couple of minutes, it sprung to life! Yeah ... it's alive!
He felt that the movement of the time adjustment button was initially interfering with the movement of the gears until it suddenly gains control and everything does what it is supposed to do. Seemed a reasonable suggestion so I put the clock to the test and have had this ornament sitting alongside the tiny ornamental clock (with the Miyota movement) that I am also seeking a new home for and compared the times (particularly any stopping of the movement as indicated by the second hand) for a period of just over 2 weeks ... NO glitches, NO hiccups at all
The time keeping is fine when I compare the two clocks and NOT ONCE did this CASIO movement hiccup - the second hand just keeps on going around and around the face ad-infinitum without a care in the world.
COSMETIC CONDITION:
The CASIO cased movement is in great condition
NO marks or scratching to the glass face
NO significant marks or scratches to the Gold gilted metal
The marble telephone has NO chips or cracks
I can see some slight Yellowish discolouration on the top of the base and after researching this I have come to the conclusion that at some stage this marble has been given a clean with a liquid such as a Lemon based cleaner - marble is in fact porous and cleaning fluids (particularly those containing Lemon as an ingredient) CAN damage the surface although I would have thought this surface had a sealant but apparently not.
I have given it a good "clean over" with just warm water (clock movement removed of course!) and a soft polishing cloth - nothing too harsh.
It certainly "scrubbed up" well and looks pretty good!
I have now placed this ornamental paperweight within a sealed clear plastic packaging to prevent the collection of dust or airborne dirt.