SPARE PART only, not the complete turntable!
HISTORY:
In our audio post production business "many moons ago" we used many different types of turntables, from the venerable Technics SP10's, Planar, LP12's, Dual's of various kinds and so many more. I had a personal interest in turntables as well and tended to collect just about any turntable that looked interesting - although in the budget category, this turntable has an interesting feature ...
Multi-play (repeat) function although I never used this, generally you listen to a piece of vinyl once and move on but if ever you wanted to, you could set this turntable to play the vinyl twice, thrice or even for all eternity over and over and over!
I was recently using this turntable, it ran fine EXCEPT I did look into a significant problem it had, it would not turn OFF when the tonearm was at rest! Feeling rested after my holiday, I took a good look at what was going on ... I discovered it had a mechanical issue with the cam and actuating lever and after thinking about it, I decided this turntable was going to go up on the workbench for "the operation" - Yes, it has become an organ donor so that another Q310 can live again!
Yes, there will be more Q310 spare parts being advertised ... look HERE to see them all
AKAI (Japan) - Q310 Record Turntable
Designed & made in Japan
Direct drive
Electronic locked speed control
Designed for the consumer marketplace with some "extra features" thrown in for good measure i.e it could run as a Manual or Fully Automatic with single, double or infinite repeat of the vinyl being played.
Australian market model: 240V with a standard Australian plug (no earth pin) mould fitted to the 2 metre lead
Two speed: 45 or 33rpm
Front controls are either soft touch push buttons or slide controls, depending upon the function.
SPARE PART THAT IS BEING OFFERED: Base Board
AKAI Part Number: Not identified in the Service Manual
Colour: Brown
All wooden construction with a metal shield (which sits above the turntable power transformer) The wood is a composite type, like a pegboard.
Secured to the turntable underside with screws, these are also supplied
CLEAN
Straight and true - not bent!
SOME DIMENSIONS: this info could be useful if adapting this board for use with another turntable
434mm x 340mm x 4.3mm thick wood
Weight: 525g
This back board has now been packed into a sealed clear plastic packet, waiting for a new purpose in life!
