HISTORY:
This is a nice length of high current cable extracted from the EATON ePDU (USA) that I have had here for ages (new) but no-one had an interest in it (probably because it was designed for a 3 phase supply)
I decided it was time to undergo "the operation" and the EATON ePDU is no more, items of interest are now being offered separately.
This cable has not seen a single Amp pass through it and is exactly as removed from the original equipment
CCI ROYAL (USA)
3 Phase (5 conductor) High Current Cable
Designed for use with 3 Phase or Multiple single phase systems - the ePDU was designed for the Australian market, safely operating at 415 or 240V AC
Catalogue #830509
Length: 2.75 metres
Exactly as removed from the ePDU, one end (where the plug was fitted) is bare wires and the other end has either a spade or eye connector crimped to the conductor.
The cable is identified (stamped on the sheath) as ...
CCI ROYAL X/C 10 AWG (5.25 MM2) SOOW E54868-L (UL) 600V -40C TO 90C -- CSA LL39753(L) SOOW 600V -40C TO 90CFT2 WATER RESISTANT P-07-KA070018-1 MSHA
All conductors within the sheath are of the same gauge i.e 10AWG, are bare copper stranded (104/30) and have colour coded sheaths.
Each conductor is rated to carry 20 Amp
While this cable was designed into the ePDC, there is no reason why it could not be used a much lower voltages, such as a 12V custom power system.
The sheath is made from premium grade oil resistant Ethylene Propylene (EPDM)
Outer diameter of the sheath is 19.56mm with the sheath thickness of 1.14mm
COSMETIC CONDITION:
"As" NEW never been put to use
Clean
NO damage or "nicks" in the sheath although there is a "compression" at one end where a cable entry gland was fitted - no damage to the sheath, just "depressed"
To maintain the current condition I have now placed this cable into a sealed clear plastic packet.
