BACKGROUND:
I am slowly "working through" the workshop-production spare parts storeroom stocks and here is another new, unused spare part from the drawers I am slowly working through.
CEEP is a well known UK manufacturer of high quality connector products for industrial and military use.
Want to know what else they manufacture? Take a look HERE
CEEP (Connectors Ltd) UK - 25 Way connector
Country of origin: United Kingdom
D25 Female (commonly referred to as DB25's)
Panel mounting
PCB pins, right angle orientation
All pins are Gold plated
Part # DN 25 S (Yes, the same part number as stamped on the Male version!)
CEEP is stamped into the metal frame
COSMETIC CONDITION:
NEW Old Stock
CLEAN
NO physical damage to the connector
NO damage to the front sockets, or the rear pins - note ... the rear pins can be rotated slightly, this is intentional and makes fitting to a PCB much easier.
The PCB pins "stepped" at the last 4mm i.e where the pin goes through the PCB. The pin diameter before this point is 0.79mm and at board entry the diameter 0.5mm
NO oxidisation to the Gold plated pins
These were stored in sealed plastic packages and will be supplied the same way
