Skip to main content

EATON USA ePDU VPC2864 Rack Managed Power Distribution

Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Calculated at Checkout

EATON (USA) high quality commercial power distribution unit

Supplied as in the photographs, WITHOUT the mounting bracket

As new condition and of course fully functioning (decommissioned site)


Electronic AC Power Distribution with monitoring

NO surge or spike suppression

Made in USA

Australian model

These units are not "off the shelf" but made to customer order, so they are not easy to find quickly.

AC Power input is 3 phase (Star configuration) using an IEC 60309 (532P6W) male connector (Phase 1, Phase 2, Phase 3, Neutral, Earth)

Supply voltage on each phase: 208 - 230 or 415 3 phase

3 metre supply cable, with waterproof rubber outer

3 sections, one section for each phase

Each section has:

20A circuit breaker

10x IEC C13 sockets

2x IEC C19 sockets

So in total, across the 3 phases, there are 30x C13 sockets and 6x C19 sockets

Monitoring of the system via ethernet using HTTP or SNMP (RJ45)

Optional temperature probes can be connected via another RJ45 socket, for monitoring hot spots or cooling loss with the rack cabinet.

Digital display showing current being drawn

No damage to the equipment in any aspect, 3 phase connector wrapped in bubblewrap to protect it and cardboard surrounding the digital display/RJ45 ports

Stored in our storage units, clean and moisture free

Construction material of the frame is square section steel

Height: 1.83m x 18cm x 18cm

Weight: 10Kg packed

Typical RRP for this model was US$1200

PLEASE NOTE: Australia Post will not accept this for shipping - too large. We will quote on a case by case basis using a courier service instead

Condition exactly as described Non-returnable used product

Videos Hide Videos Show Videos