Ex workshop stock
These connectors are NEW and unused.
CANNON - XLR Connector
Made in Australia
Part # XLR-3-31
Type: 3 pole connections in a chassis mounting locking female socket, rectangular flange design
Pin 1 is forward of the other pins (normally Ground or Return) so that it is the last connection to "break" and the first connection to "make" - no BUZZ or loud 50Hz hum upon insertion/removal of the plug.
All metal construction, including the lock
Solder cup terminations at the rear
NOTE: I suspect these are Silver plated, there is a slight yellowish tinge which is typical of aged Silver (oxidisation)
Chrome/Silver finish
Stamped into the front of the flange
CANNON
Stamped into the rear of the flange (top corner)
AUSTRALIA
I believe this is a later production to the XLP-3-13's I have HERE because there is no part number stamped into the body of these sockets and the rear barrel on these connectors is "stepped" down towards the rear i.e different construction used.
DIMENSIONS (Flange): 27mm wide x 36.55 height
2x diagonal mounting holes
Rear barrel has a three "step" design, closest to the flange is 24mm diameter followed by 21.5mm diameter and finally 17.55mm diameter with a total rear barrel length of 24.75mm
COSMETIC CONDITION:
Stored in a sealed clear plastic packet
CLEAN
NO oxidisation or tarnishing of the body, internal barrel but a very light tarnishing (light yellow - almost like a Gold plating, but it's not Gold) can be seen on the rear solder cup terminations
Solder cups are UNUSED and clean
Each connector is in a sealed clear plastic packet
*** Where the photograph shows multiple components, this advertisement price is for ONE ONLY not all that are shown!
