How useful are these in the workshop or "shack"!
I know we used heaps of these over the years, all those little trannies or other small components which are put into little bags and never seen again! At least these containers allow for easy labelling and location (hopefully) and you can see inside to check the contents.
These are actually ex-Medical industry, made to a very high standard and quite strong/robust.
STORAGE CONTAINER - Small Bottle
All crystal clear acrylic with a White opaque cap
Positive, long thread screw on-off cap
Inside the top of the cap is a "foam" insert, this MAY mean that liquids could be safely stored although we never tried this.
NO graduation lines, measurement points or any other markings on the crystal clear acrylic material
DIMENSIONS:
Acrylic material is 1.40mm thick
Height: 70mm (widest section) then an additional 15mm for the top cap section. This meaning the component length can be up to 85mm, depending upon the width of the component(s)
Diameter: 34.75mm OD or 32mm ID
Neck diameter: 18.75mm ID
COSMETIC CONDITION:
NEW Old Stock
These are NOT our used containers, they are the "left overs" from my cleanup ...
CLEAN
Unscratched or marked
Always been kept in sealed clear plastic packets, they will be supplied the same way
