Excellent quality and flexibility for Eurocard prototyping/R&D
Eurocard standard rack mounting frame (#3) ex broadcast equipment
Very high quality build and secured with hex head threaded bolts.
This unit is supplied with 12x sets of green card guide rails
Depth of this unit is 257mm front to back
Depth for the cards is 170mm - this is NOT adjustable, you can see on the side panels that there are no other holes to facilitate moving of the card rear rail.
Ex broadcast equipment
3RU aluminium eurocard frame
OPEN style i.e it has the sides of course, front/rear rails but NO top or bottom plate or shield.
Standard 19" rack width
Supplied exactly as pictured, the photographs tell the story
Note: Rack ears are removable - easy to remove if required
These units are perfect for prototyping/development of equipment design by providing user flexibility in the location and fitting of internal cards.
This is your basic building block, you will need card guide rails, nuts, bolts etc - we have lots of these if you need them.
Also a quantity of card related hardware such as support elbows, front pull handles, card panel lock bolts etc
All bolts are threaded, not self tappers!
These are high quality precision frames, working with these is a bit like playing with Meccano (if you can remember Meccano), very flexible development environment.
Although a 19" 3RU frame, we are happy to carefully disassemble and ship as a "flat pack" because that will be cheaper to ship although the buyer then must reassemble the frame (easy)
2Kg
