The Titan was a classic domestic film projector from the 1970's and parts can now be extremely difficult to find
I had a couple of Titan projector's, one was always kept on hand "for spares" but as it turned out, I never needed to salvage any parts and now that all my film projectors are "leaving home" it is time to find new homes for the spare parts.
Refer to the photograph included which shows the location of the part being offered.
These parts equally suit the Super 8 only projector or the Tri-matic projector - film only, no sound.
It is entirely possible that these parts will suit other Titan projectors, it is up to the buyer to establish if the parts I have will suit them.
TITAN 8mm Film Projector - SPARE PART ONLY
Made in Japan
Part: Front side facia with bolts
There is not a lot of plastic on these projectors but this is one piece fitted on the front side of the projector, supplied along with the securing bolts/nuts
Although existing machines are not likely to have this piece missing, very useful if a previous owner has damaged the fascia strip (cracks/marks etc)
Possibly suitable for other Titan projectors but I cannot advise on this.
See the 2nd photograph for the fitted location of this panel (it sits behind the removeable cover)
The size of this fascia cover panel is:
293mm long x 71mm at the widest point
Brown coloured plastic
4x bolts with all metal knurdled top
Condition: Clean, undamaged
Due to the delicate nature of this part, stored and supplied sitting on a stiff cardboard which is then sealed in plastic
