Used but tested OK
Typically used in motor control but we used this relay in some custom industrial control equipment as part of our production processes and it actually barely ever was activated.
Fujitsu (Japan)
Power Relay
Type: FRL-256 A024/02CS
24V AC Coil
DPDT
Contacts rated at 10A 240V AC or 10A 30V DC
Motor switching 1/2HP 240V AC
Supplied with an IDEC Octal socket (DIN Mount compatible or surface mount)
Socket is type: SR2P-05U
(These sockets are current stock items at Element 14)
COSMETIC CONDITION:
Clean undamaged relay case and octal base
Relay contacts bright and no "pitting" from arcing
TESTING:
Coil is 80 Ohm
Activation voltage 24V AC
Very positive, audible "clunk" when operated
DC resistance checked on all of the DPDT switch contacts - no problems at all
NOTE: The IDEC octal socket does have two of the screw terminals missing, meaning that as supplied at the moment you could only wire this relay for either normally on (double pole) or normally closed (double pole) - these screws are not special but I couldn't find any right at the moment, also because these screws are not "locked" you can just move the screws to the normally open contact set if that suited your purposes. You will need the extra 2x screws to use the full DPDT functionality.
Since testing I have now packed this relay with socket in sealed plastic
