Have some legacy broadcast equipment and just can't find that special PRC05 connector?
This may fit the bill.
Removed from some vintage broadcast studio cabling (Sony, Ikegami vision control cables)
Perfect for legacy equipment repair/restoration or testing
Tajimi (TMW) Connector
Type: PRC-05 8 Pin Male
Push Pull Locking connector for reliable, secure connections
8 pins arranged in a circular pattern of 7 plus 1 central pin
All pins are gold plated
Cable mount, solder terminations
Complete with all hardware including the cable boot
SPECIAL NOTE: When handling/opening these be VERY careful. There are 2 grub screws which lock one half of the connector body with the other. These must be the smallest grub screws I have ever seen! - you will need a very small/thin slot type screwdriver (jewellers screwdriver) and make sure the work area is clean and clear of all other items because if one of these screws comes out, they can be extremely difficult to find!
It is also worth noting that to open the two body halves, only 1 or 2 rotations of the grub screw is required to release the lock and allow for unscrewing of the body components.
