Another strange connector from days long gone, useful if you have some old gear.
I seem to remember this type of plug/socket arrangement appeared on a number of Japanese products in the 70's & 80's
REMEMBER: If you are using this with Japanese equipment, it is vital that a check is made of the equipment AC line voltage setting - it must be 240V not 100V or 110V
Power Lead
1.8m long
2 pin keyed female to 2 pin Australian male plug
Rated at 1A - 250V
Australian made by CMA - Cable Makers Australia
Please look very carefully at the photograph of the "important end" of this lead
Two holes 70mm apart
Each hole is 2mm diameter
Central slot on one side to allow for "keying" into the matching socket
The other side is flat however it has a bevelled edge to allow for easier insertion
Marked simply as:
N/43
E 701
The Australian male plug (not earthed) is marked as
N/43
E 628
