HISTORY:
I have been sorting and clearing out a large amount of components and equipment "gathered" over the years, now it is time to sort out some power supplies. I always kept a multitude of these "lying around" as they always seemed to come in handy from time to time
Here is one of them ...
Commonly used for small IT peripheral devices e.g external hard drives
UNIDENTIFIED MANUFACTURER - Dual Rail DC Power Supply
Made in China
Technology: Switchmode
This is a generic "copy" of the Flypower product
Model: SPP34-12.0/5.0-2000
Input: 100V ~ 250V AC
Figure 8 AC input socket (The AC input cable will NOT be supplied but I have some suitable Australian Standards leads advertised separately)
Output: Dual Rail +12V DC @ 2A & +5V DC @ 2A
6 Pin circular male plug connector used for the DC output
Power ON indicator built in
DC Output Lead length 70cm
Inbuilt ferrite to suppress any High Frequency noise on the output lead
Output connector is wired as pictured below
PSU Dimensions: 115mm Length x 47mm Wide x 30mm Height
COSMETIC CONDITION:
USED
CLEAN
NO damage at all to the case or lead/plug
TESTING:
Checked the DC outputs (no load conditions), measures +11.91V DC and +5.11V DC
There is no DC or ground/common connection to the outer metal shell of the plug
After testing, this power supply is now within a sealed clear plastic package to maintain the condition.
Again I must mention, the AC input lead (Figure 8 rounded) is NOT included but if you don't have one already (doesn't every respectable technician have a supply of these on hand?) then I do have a variety of them advertised separately.
