High Quality Tamura 600:600 CT Audio Transformers to 100Khz

Tamura is a manufacturer well known for their very high quality audio transformer products.

These transformers I am offering are very small, for low level signal work - typically inputs to audio amplifiers or coupling between stages.

I have and am happy to supply the manufacturer specifications/datasheets for these transformers.

These are broadcast industry equipment "pulls" - carefully desoldered, leads are gold plated and of sufficient length to be used as PCB mounted again or solder flying leads and then encapsulate in shrink tubing to be used "above board"

Tamura Audio Transformer

Model: MG-21

Dates from the mid 1980's

Impedance Primary 600 Ohm with a centre tap

Impedance Secondary 600 Ohm with a centre tap

In the photographs you can see the legs which are untouched, those are the centre-taps which were not used in the original application (broadcast audio equipment)

DC resistance is 75 Ohms Primary - 95 Ohms Secondary

Maximum level is 18dBm

3dB points are 100Hz - 100Khz

Perfect for audio amplifier inputs and also transformer coupling stage to stage.

These will NOT suit use for moving coil low level boosting, the transformer ratio must be step up in those cases and these MG-21's are 1:1

Maximum current flowing 3mA

Extremely difficult to find, and when you can, extremely expensive.

Remember these are "pulls" but in excellent condition both physically and electrically.