USED Old Stock
Ex workshop spare parts and R&D/manufacturing stock
These terminals posts are identical in every way to those terminal posts HERE but there has been wiring soldering to the strip connection at some stage, since removed and the termination point "cleaned up" ready for reuse.
UNIDENTIFIED MANUFACTURER - Terminal Post Set (2)
Country of manufacture is unknown
Red (1) Black (1)
Banana socket and through hole binding post
All metal construction
Top section (Banana socket) is a Silver coloured metal inside (unknown type) with a high lustre external finish - similar to brushed Aluminium but it feels too heavy to be that metal. Knurled finger grip to the top.
The centre section (with hole for the wire and mounting thread) is definitely Brass
Brass terminal strip for solding
ID colour band looks to be either a fitted rubber or plastic band which fits into a recess on the body.
Quality "general use" terminals
Most often used to provide terminals on the rear of loudspeaker cabinets or insulated rear panel amplifier output terminals but we have also used these panel mounted for test equipment - easy connection point for probes etc
Solder end terminations - solid Brass strips, not a tag
DIMENSIONS:
TOP (Silver coloured section) 12.5mm diameter x 12mm height
BOTTOM (Brass) section with the hole and threaded top (for the top section) and bottom, for mounting 18.3mm length x 7mm (top where the hole is) and 3.9mm at the mounting end. This means you need a 4mm hole in your mounting surface to fit this terminal.
The hole for speaker cable is 2.5mm diameter
The channel for a Banana plug (in the top section) is 5mm diameter
The Brass strip is 28mm L x 5.75mm W x 0.4mm thick - larger hole at one end for fitting onto the terminal post and the other hole is for soldering (not a spade type of terminal)
COSMETIC CONDITION:
USED, although "like new" in all respects except it can be seen that there has been solder on the terminal strips
CLEAN
NO damage at all
Stored in plastic packet sets of two (1x Red 1x Black)
