HYPER - Microphone Lead
General purpose
Unbalanced
Cannon XLR 3 pin female to TS Jack plug
Cable is marked (White print) as:
HYPER NOISELESS CABLE
I would not place this lead in the professional realm, but perfectly fine for home studio or karaoke use
Cable Diameter: 6mm diameter
Cable length: 4.6 metres
CONDITION:
USED
CLEAN
NO damage to either the XLR or Jack Plug
NO cable sheath damage
Cable has a very nice "flexible" feel, close your eyes and you "could" be holding some Klotz!
Examined the XLR solder connections, insulating sleeve & cable strain relief and all is fine. Jack plug (unbranded) is also in very good condition, spring type cable strain relief, insulating sleeve and solder connections look to be very good. Only down side is the use of the "pinch" type clamp around the cable sheath at the entry point.
TESTING:
Checked the wiring at the XLR, all fine and standard for this type of lead i.e Pin 2 is hot, Pin 3 Cold and is strapped to Pin 1
Measured the cable capacitance at 100pF/Foot
Plugged into a desk and "threw the cable around" without any noise heard (quick and dirty poor connection test)
