NEW Old Stock
Ex our workshop stores, we used a lot of small diameter drill bits and I think this is the last of them. All of our sub-1mm bits have gone and now I have sorted these drill bits which sit in the range 1mm ~ 3mm
Each drill size has it's own ORIGINAL manufacturers packing (see photograph) and I will supply in that packaging if buying a "pack quantity" OR I am fine with mixed selections, each drill supplied with then be sent in it's own sealed clear plastic pack with the size clearly marked.
I am most interested in the lot all going off to a busy "driller" and the substantial discount for purchasing them all reflects this ...
HISTORY:
Over the years we undertook massive amounts of prototyping and enclosure construction, all hand constructed. We kept a very wide range of drill bits ... here are some of the small drill bits that are eager to go to work for someone else.
If you are new to prototyping or hobbyist drilling, NEVER use those "el-cheapo" Asian drill bits - we did try some yonks ago and after just a few holes through reasonably thin Aluminium sheeting, the bits were as blunt as - a complete waste of money!
All quantities are PER DRILL BIT
Buy more and the asking price goes down
Buy the lot and they are almost being given away!
P+N, SUTTON - Drill Bits
P + N is Patience & Nicholson (Boral)
Steel
High Speed
SIZE, QUANTITY, PACK SEALED (OR NOT) & MANUFACTURER
All sizes are as marked on the packet
Where it says SMALL HOLE/NOT SEALED this means the packet has been opened to withdraw a drill bit - the hole is not large and the packet continues to hold the remaining drill bits securely
1.6mm (9) SMALL HOLE/NOT SEALED P + N
1.65mm (5) SMALL HOLE/NOT SEALED P + N
1.7mm (9) SMALL HOLE/NOT SEALED P + N
1.75mm (9) SMALL HOLE/NOT SEALED P + N
1.8mm (10) SEALED P + N
1.9mm (7) SMALL HOLE/NOT SEALED P + N
1.95mm (3) SMALL HOLE/NOT SEALED P + N
2.45mm (10) SEALED P + N
2.5Omm (7) SMALL HOLE/NOT SEALED SUTTON
2.55mm (2) SMALL HOLE/NOT SEALED P + N
2.6mm (8) SMALL HOLE/NOT SEALED SUTTON
2.70mm (6) SMALL HOLE/NOT SEALED P + N
2.75mm (7) SMALL HOLE/NOT SEALED P + N
3.175mm/1/8" (5) SMALL HOLE/NOT SEALED SUTTON
3.2mm (2) SMALL HOLE/NOT SEALED SUTTON
A total of 99 drill bits - select the quantity and sizes you would like OR just say "Hey Russ, I'll take the lot!" (big discount for doing that!)
COSMETIC CONDITION:
(Applies to every drill bit)
NO RUST OR OXIDISATION OBSERVED
NO broken shafts or cutter
NO bent bits
Most packets are "like new" with the four sided seals intact, when opened to remove drill bits, a small hole was made in the front so that the packet remained useful for storing the bits.
*** The photograph shows all of the above drill bits in their packets
Since examining all of these packets, I have now placed them ALL into a sealed bag so that no pieces can go astray.
Obviously, if you are purchasing a lesser number than the whole lot PLEASE let me know which size and quantity you are after.
