Every piece of equipment powered via the single phase AC mains supply should have one of these installed in the AC supply input line and often (but not always) there is some sort of EMI filtering built into the IEC rear panel socket but ... not always.
If you have equipment that is behaving strangely, particularly when other equipment is being turned on or off e.g motors, you may have an EMI issue (unwanted nasties travelling along the AC supply line along with the AC you really want)
The beauty of these "stand-alone" modules is that you can disconnect your existing rear panel IEC socket wiring, connect this EMI filter block between the power coming in and the power going to your equipment internally and your EMI problems SHOULD be solved.
SPRAGUE of course is synonymous with high quality American engineering although this is actually Taiwan assembled product
SPRAGUE - EMI Filter Block
Model: 5JX5204A
Designed in USA
Made in Taiwan
Suitable for 115/250V operation, maximum through current is 5A
Rated for use up to 40 degrees C
All terminals are spade type
Metallic label on top of the casing identifies the filter, provides component values and a schematic
DIMENSIONS:
All metal casing
52mm x 44.5mm x 28.5mm H
Feet on two sides of the block, metal tabs 11mm L x 9.75 W and each pre-drilled with a 4.5mm hole for mounting
COSMETIC CONDITION:
NEW Old Stock
CLEAN
Spade terminals are clean and not oxidised!
These have now been packed into individual sealed packets to maintain their condition
*** Where the photograph shows multiple items, this advertisement is for ONE ONLY not all that are shown!