DIN 41612 is a European engineering standard commonly used for rack system prototypes, R & D and commercial electronic systems. Using this standard, cards can be designed for fitting into rack sub-frame slots, often up to 12 cards across the width of the frame.
When you have so many cards in close proximity, it is often desirable to shield one card from another to prevent mutual interference.
That is the sole purpose of these plates, they are usually fitted on the underside of a card PCB (4x corner posts) and provide a good shield between adjacent cards.
These plates are USED, removed from Broadcast equipment but completely suitable for re-use.
EUROCARD (DIN 41612) - Card Shield Plate (1)
Intended for signal shielding between boards
Material: Anodised (Silver finish) Steel (Ferrous)
Mounted on the underside of the card PCB, using 4x bolts - all hardware is supplied.
DIMENSIONS:
200mm Length x 92mm Wide x 0.9mm Thick
Posts (each corner) 5.5mm diameter x 4.75mm height
Screws supplied with the posts
Each plate is packed individually in a sealed clear plastic packet.
