USED
Ex broadcast industry standard 19" sub-rack frame
Typically these aluminium rails are used to support heavier Eurocard/DIN 41612 slide in modules such as power supplies or AC transformer cards where a standard nylon or plastic guide rail may not support the weight of the card sufficiently.
Sub-frame hardware can be VERY expensive! Using these not only saves our planet's resources (re-using) but saves big money on your next sub-frame project!
UNKNOWN MANUFACTURER - Card Guide Rail (1)
These were extracted from either Vero or Schroff sub-rack frames but I cannot see any identification numbers at all on the component
This advertisement price is for one rail (in the interests of the greatest flexibility to the user) although in normal circumstances you would need two rails, one upper and one lower.
MATERIAL: high standard extruded Black coated Aluminium
DIMENSIONS:
TOTAL LENGTH: 210mm
Two mounting bolts (2.4mm diameter) which screw into metal plates. These plates can slide (and be fixed) in any position along the rail.
MAXIMUM BOLT TO BOLT DISTANCE APART: 200mm
There are NO mounting holes built into the rail
NORMAL ORIENTATION (mounting the rail so that cards are inserted vertically)
Card sits 2mm down inside the card rail
Card rail width is 2mm
Each rail supplied with the two original mounting bolts & metal plates which slide along inside the rail
COSMETIC CONDITION:
USED
CLEAN
Straight and completely undamaged
Now individually packed into sealed clear plastic packets, with the 2x bolts/plates
