THIS ADVERTISEMENT IS FOR THE COMPLETE E2 MODULE ON THE RIGHT-HAND SIDE OF THE UPSF2
I am also prepared to offer the internal cards, silverplated mainframe and the front panel control system as individual sections, these are advertised separate from this advertisment.
If any sub-section of the complete E2 is sold in this way, this complete E2 module will be removed from this site.
Rohde & Schwarz Video Noise Meter Model UPSF2 (digital display unlike the UPSF which is analog meters only)
E2 Module ONLY
The UPSF 2 is specifically designed for the measurement of spurious modulation from the television transmitter (see the block diagram providing a typical setup)
The purpose of the E2 module is for the measurement of video level & chromatic signal noise
Rohde & Schwarz
UPSF 2 E2 Module
Complete and working prior to removal from the main unit. This module sits to the right of the main instrument and is designed as a plug in module, communicating with the "outside world" via a single male connector.
Modular design (plug in cards) which are accessed by removing the slide-out instruction sheet accessible from the front panel.
Cards installed are:
Passive instruction card - slides out on the left-hand side of the module. This card has (screen printed onto aluminium) a listing of numerical codes and their function
A1 Programm
A2 Level Pulses
A3 Level Measurement
A4 Chroma Pulses
A5 Chroma Phase
A6 Chroma Amplitude
A7 Chroma Filter
These cards all have DIN41612 connectors fitted to the rear which fit into corresponding (labelled) female connectors in the small mainframe. The "cage" of the mainframe is silver-plated.
COSMETIC CONDITION:
The complete E2 module is in very good condition, all button legends are clear and clean
Locking hardware is supplied
TESTING:
Removed from service some time ago due to the move from analog television transmission to digital. Fully functioning prior to removal from service.
