null Skip to main content

SPARE PART - Commercial F.E.D Model: GHD-813 Double Contact Grill Thermal Cutout

Foshan

$2.00
Condition:
Used
Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

F.E.D Double Contact Commercial Grill

Model: GHD-813

 

SPARE PART ONLY - NOT THE COMPLETE EQUIPMENT

Part: KSD306 Series Bi-Metal Primary Thermal Cutout Switch

Foshan (China)

Double Pole

130C on

This mounts next to the terminal blocks and is intended as a "master thermal cutout" safety device, activation temperature 130C

The switch is the manual reset type

Rated at 20A 240V AC

See the photograph for technical drawing of the dimensions

 

CONDITION:

Used but clean and undamaged

No body cracks

Double pole, all spade contacts clean

Top sensor area is clean

 

TESTING:

I undertook testing myself ...

Normally closed circuit on each pole, I then sat this on a hot element and gradually increased the temperature until "click" the bi-metal switch operates and the switch goes open circuit. This switch is a manual reset type - usually if this switch has activated in the equipment, something drastically wrong is happening (severe overheating). Once cooled down, I pushed the rear black button (small) which is only accessible by removing the base plate in the equipment and the switch reset to normal operation (closed circuit) fine.

I am satisfied this is working correctly.

Brass thread is clean and undamaged

 

Testing performed as outlined in the description. Used item, non returnable