Yellow fiber 80cn length
BLUE SC CONNECTOR
Also have an SLT4460-CS-F8508
800mm single mode pigtail
EXTREMELY carefully removed from equipment (ESD precautions and also stored in ESD bags)
One of the photographs shows the laser as it was originally installed on the communications board.
Sumitomo laser
MQW DFB
Part number SLT4261-CS
1300nm frequency - typically around 1310nm
2mW output is an average light output, absolute maximum 3.5mW
I have full operating parameters available
Incorporates a single stage isolator
Flange type mounting, 12.7mm hole spacing - supplied with mounting hardware
Single mode pigtail is 800mm long and terminated with a SC/PC connector
Designed for use in long haul 2.5Gb/s fibre communication systems
but we are making these available for R&D and experimental purposes.
4 pins - a set for the laser diode and another set for the isolator, pin numbering is given in the datasheets I can supply.
Being very delicate, two of the photographs show the laser diode packed in a hard plastic case - this is how they will be received, not loose!