Radio control receiver module from Bosch, originally an optional extra with a commercial Bosch Alarm System but because it will function "stand-alone" this could be very adaptable to many purposes requiring remote operation of other equipment.
One catch here! I am offering the receiver module ONLY - I do not have the keyfob transmitter
Bosch RF Control Receiver
Manufactured by EDM Australia
Model: RE005E
Software Version 1,0
PCB version (EDM) 345F2 (2003)
Operating frequency 304Mhz
2 RF Channels - 120 codes can be programmed by the user
This is a "learning" system - the receiver can learn the code from the transmitter (keyfob) and respond in a way the user chooses
Instruction manual (which includes "how to program") is included
Fully intelligent user programmable using 4 push buttons internal to the unit (easy to get inside)
Provides interfacing to a Solutions alarm system OR dedicated control of other equipment via relays on each channel output e.g garage door control, electric gate control etc
Screw down connector block provides:
+12V Supply
Clock
Relay contacts (2x single pole changeover)
Next to the connector strip are 2x red leds and these indicate the channel that is current active
Module dimensions: 110mm x 62mm wide x 38mm high
I WILL NOT/DO NOT HAVE THE KEYFOB TRANSMITTER UNIT, YOU MUST SUPPLY THIS YOURSELF
In this regard, it is up to you to find a suitable transmitter but I have looked around online and there are many Bosch 304Mhz transmitters available, around A$20 - $40 each but the best source could be if you can find an old Bosch Alarm System (or Solution 6) and salvage the keyfob transmitter from that - no cost keyfob!
Known to be working/fully functional prior to decommissioning the alarm system.
