null Skip to main content

SANSUI Budget Loudspeaker 2" Tweeter (USED WORKING)

$10.00
SKU:
CHKGUM7210
Condition:
Used
Minimum Purchase:
1 unit
Maximum Purchase:
2 units
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save

Oh Dear! This item has been sold but take a look around for other similar items

 

HISTORY:

 

This 2" tweeter was removed from an old Sansui DA-P500 stereo system, a budget unit from the days when Sansui (and many other Japanese manufacturers) went down the price spiral and cut costs, in short - horrible plastic little jobbies!

 

Anyway, these Sansui's have nice LARGE volume speaker cabinets and as the main system unit had failed, I decided to have a look inside the cabinets.

 

3 way system (all speakers are on my advertisements, as separate items) and this one is the tweeter ONLY (one channel)

 

These are NOT Klipsch's by any stretch of the imagination but they are "adequate" general purpose, fairly low power requirements.

 

Please read on ...

 

 

 

Generic Tweeter (ex Sansui)

 

1980's era

 

Part # H66AP45-01F

 

2" paper cone 

6W RMS power handling

 

8 Ohm impedance

 

Total weight: 250g

 

Magnet size/diameter: 45mm diameter x 15mm deep

 

Made in Taiwan

 

 

 

COSMETIC CONDITION:

 

Everything looks ship shape, no damage to any part (cone, surround etc)

 

Basket (fully enclosed) is in "as new" condition

 

Spade terminals are secure and clean

 

 

 

TESTING:

 

The DA-P500 system was only used for low level background music, to entertain guests - nothing special from an audio point of view.

 

Before removing from the very large (massive but no porting and absolutely no wadding inside!) loudspeaker cabinet(s) I checked the loudspeakers - each individually (tweeter, mid range & this woofer) and listened closely for scratching or other strange cone/voice coil noises - nothing heard, in fact the audio is nice and clean - pretty good and better than I would have expected under close audio scrutiny.

 

The basket is pressed steel, closed frame

 

4x mounting holes around the rim.

 

I connected these to another system I have under test here (Technics SE-A808) and slowly pushed up the volume while listening to how the loudspeaker was handling the music. I went right up to approximately 10W RMS into this tweeter and the audio was still nice and clean although of course, pretty "reedy" - I didn't push the tweeter any further than this.

 

Just a note about these mystery Taiwanese speakers. Back in the day, these exact same speakers could be purchased from Radio Parts (Melbourne) in 1980 for A$10 each - they were sold as generic but reasonable quality loudspeakers, not high end but not "bottom of the barrel" types either. Radio Parts would only identify them as sourced from the "world's largest manufacturer of speakers" in their advertisements and refers to them as "high efficiency".

I do not know which factory pushed these out, Taiwan had MANY audio (and specifically loudspeaker) manufacturers in this time period but it is pretty obvious that this woofer was made to a price point, which explains this choice by Sansui for their "price conscious" DA-P500 market.

 

So in summary, a reasonable quality tweeter for general high frequency, low power needs

 

Since removal from the cabinet, checked and then laid onto stiff cardboard (cone down) and sealed in plastic to ensure no dust contamination

 

 

 

PLEASE NOTE: this advertisement is for ONE tweeter but I do have TWO available. If you purchase the 2 of these in my store checkout, a discounted price (for buying them both) is automatically applied.

Condition exactly as described Non-returnable used product