HISTORY:
My previous business for 25+ years was audio post production but as a side-line we had a quantity of equipment designated as "loaners" for up and coming bands/artists who had either struck misfortune (like some "low life" stealing their gear at a gig) or their existing equipment had simply failed on them, usually at the worst possible moment!
These spare parts come from our Behringer MX 2004A multi-track audio mixer, the equipment has been rechecked immediately prior to dismantling and everything is working great BUT it had some cosmetic issues so I have decided to part out the equipment instead of offering as a complete unit.
Love them or hate them (and some do!), here is the rear input & output board for the Behringer MX 2004A ... it has been tested prior to dismantling and absolutely fully functioning prior to dismantling so it is suitable as either a "drop in" replacement or as a "component farm" for components. This module connects to the mainboard via cables which are supplied with the MAINBOARD (fixed connection at the mainboard) - the interconnect cabling is NOT supplied with this module.
Behringer Audio Mixer (SPARE PART)
Model: MX 2004A
Part # MX2004-A/02
Audio Input & Output board
Dimensions: 320mm wide x 23mm deep x 35mm high
Weight: 150g
NO components have been removed
I will not be supplying the nuts/top washer for all of the 6.5mm input/output sockets
There is one switch with an extender shaft and small black knob and this is supplied.
COSMETIC CONDITION :
No damage to the board or any of the mounted components
Clean and no signs of corrosion
TESTING:
Before dismantling the 2004A, I checked every input channel and the outputs, and everything was fine.
Audio through the channels was good and clean.
