Ex DENON Professional CD Player
I am very much "into" sustainability, a complete retro CD player represents a LOT of embedded energy and to waste that embedded energy is a very bad thing, even worse is to bury it in landfill and subsequently poison our environment!
What is embedded energy?
Embedded energy is a measurement of the total energy that was used to create a component, a module or a complete piece of equipment originally.
So why has this DENON DN-650F become an "organ donor"?
The DN-650F is a pretty basic machine designed with the professional in mind and it was specifically targeted at the DJ market but could/can also be found in broadcast studios. Designed for rack mount with balanced analog outputs and a digital ouput - basic controls including Cue and a pitch control
Some years back the laser assembly failed, the machine was updated/replaced with some Tascam and Studer machines and it has just been sitting in a box waiting for me to look at it again. I no longer consider it worthwhile to replace the laser assembly as I have no use for this machine anyway, so the machine has now been parted out.
FYI, the laser used in these units is the KSS-240A
DENON Single Disc CD Player SPARE PART
Model # DN-650F
PCB Part # GU-2751-1
Complete main printed circuit board which includes the AC power transformer (PCB mounted)
D/A conversion is undertaken by the Burr Brown PGM1700P
CONDITION:
Single sided board
Hybrid of traditional componentry and SMD
Cosmetically all items are in good condition, known to be fully functioning as I had the CD player powered up a couple of times prior to dismantling the machine (see the photograph of the unit powered up prior to dismantling although I also connected all the modules together and powered up when it had all been dismantled, working fine.
No interconnect cables supplied (those are offered with the individual "satellite" modules
Supplied with an assortment of original screws used to secure this board to the metal casing of the DN-650F
This module (as pictured) have now been sealed within plastic and will be supplied this way.
