Removed from low power audio equipment, perfect for repurposing
Audio Amplifier Module
Power Output: 200mW (normal) but specs for the device indicate this could be "pushed" to around 1 Watt RMS output
Stereo (2 channels)
Model: SP-100
Output speaker impedance should be 8 Ohm (common)
Integral volume control
Headphone output socket (3.5mm)
On-Off LED (Green)
Requires 12V DC supply
PCB clearly marked with the DC power port, speaker ports and audio input port
Molex connectors to suit (with cut leads) are supplied
3x screws originally used for mounting are also included
COSMETIC CONDITION:
Very clean
Undamaged
TESTING:
Prior to removal from the equipment, I have tested this little audio amplifier and it is working fine - no issues
Active audio integrated circuit is a TEA2025
NOTE: Although this chip can provide much more than 200mW, once you start pushing it to 1 Watt then the THD rises to around 10% so it may be louder but it may not sound good!
I am offering exactly as showing in the photographs
Stored in sealed plastic packaging and it will be supplied sealed
